Durbar product range

Standards and grades

EN 10025-2 : 2004, S275JR+AR and S355JR+AR

Dimensions

Durbar S275JR+AR is manufactured in standard sizes. Standard thicknesses and widths for this grade are shown below. Other combinations of thickness and width will be considered, based upon the volume required.

Standard thickness          Standard widths

3.00                                       1000/1250

4.50                                       1000/1250/1500

6.00                                       1000/1250/1500

8.00                                       1000/1250/1500

10.00                                     1000/1250/1500

12.50                                     1000/1250/1500

Standard lengths are twice the widths shown above; non-standard cut-lengths from 700mm-10,000mm are available by agreement.

Please consult us about the dimensional range for S355JR+AR.

For information about grades and dimensions not shown here, please call or email us at the location listed under Sales of coil  on our contacts page.

Distributors of Durbar also offer standard and non-standard sized plates and can also process material to suit the needs of users.

The thickness is that of the plain plate, exclusive of the raised pattern (typically 1.5mm-2.2mm).

The approximate dimensions of the pattern are shown in the illustration below.

 

Tolerances on cut lengths:  EN 10051 : 1991+A1 : 1997

Tolerances on width: Mill edge
	Tolerance (mm)
Standard width (mm)	Lower	Upper
1000	0	+20
1250	0	+20
1500	0	+20

 

 

 

 

 

 

Tolerances on length
	Tolerance (mm)
Standard length (mm)	Lower	Upper
2000	0	+10
2500	0	+12.5
3000	0	+15

 

 

 

 

 

 

Tolerances on flatness
Standard thickness (mm)	Standard width (mm)	Tolerance (mm)
3.00	1000	15
	1250	18
4.5-12.5	1000	15
	1250	18
	1500	18