Profiling
Gas and plasma profiling are available and our machines can also be used for plate stripping into lengths. Gas profiling can be achieved up to 300mm and with a bed size of up to 29m long and 3640mm wide. Plasma profiling can be done up to 50mm thick and with a bed size of 18m long and 3600mm wide.
Gas Cutting:
| Type of machine | Type of process | No of machines | Bed Size | Maximum Thickness |
| CNC 6 head | Oxy-Propane | 1 | 1200 x 2675mm | 300mm |
| CNC 6 head | Oxy-propane | 1 | 29000 x 3640mm | 300mm |
| Tolerance of +/- 3mm on length and width up to a typical plate size of 15,000 mm x 3,000 mm | ||||
Plasma Profiling:
| Type of machine | Type of process | No of machines | Bed Size | Maximum Thickness |
| CNC 2 head | Plasma - Dry Bed | 1 | 18000 x 3600mm | 50mm (best range 3 to 25 mm) |
|
|
| 1 |
| |
| Cuts Carbon Manganese steels only, up to 50mm thick, piercing up to 25mm | ||||
| Tolerance of +/- 1.5mm on length and width up to a typical plate size of 15,000mm x 3,00,, | ||||
Stripping:
- The above mentioned machines can also be used to strip plates
- Minimum strip size: 250 mm wide x 15 mm thick
- Length dependent on maximum plate length available
| Type of machine | Type of process | No of machines | Bed Size | Maximum Thickness |
| Manual 2 head | Oxy-Propane | 1 | 23500 x 3680mm |
|
| This machine can also be used with additional burners on each head to flame cut bevels | ||||
Corus Extra processing
Corus Construction and Industrial
Steel House
Redcar
United Kingdom
Enquiries
T +44 (0) 1642 406204
F +44 (0) 870 902 3695
