Hot-rolled Durbar floor plate
Durbar is hot-rolled structural steel floor plate that has an evenly distributed, raised pattern which is integral to the product.
It acts as a structural component and meets the requirements of the Construction Products Directive. Its slip-resistant surface in the original Durbar pattern is easy to clean and self-draining. Corus offers standard sizes from stock in the UK and Ireland and processing is available from a network of distributors.
Durbar can be used for stairs, walkways, platforms, bridges, containers, lifts, shipbuilding, offshore installations, cladding and commercial vehicles.
Standards and grades
EN 10025 : 2004, S275JR+AR and S355JR+AR
Dimensions
Standard thickness Standard widths
3.00 1000/1250
4.50 1000/1250/1500
6.00 1000/1250/1500
8.00 1000/1250/1500
10.00 1000/1250/1500
12.50 1000/1250/1500
The thickness is that of the plain plate, exclusive of the raised pattern (typically 1.5mm-2.2mm).
Standard lengths are twice the widths shown above; non-standard cut-lengths from 700mm-10,000mm are available on request.
For information about grades and dimensions not shown here, please call or email us at the number listed under Sales of coil below.
Sales of coil
T +44 (0)121 609 5018
F +44 (0)121 609 5050
Load span data
Members of The Steel Construction Institute can view load span data for Durbar at www.steelbiz.org, in table C242, floor plates simply supported, from the Steel Designers Manual, 6th Edition, 2003.
Corus Strip Products UK
PO Box 10, Newport
South Wales NP19 4XN
United Kingdom
